Mitsubishi GX Configurator-AD, User Manual

Page: 191 / 208

APP -4 APP -4
MELSEC-Q
APPENDIX
Appendix 1.2 OGLOAD
Reads the offset/gain values of the user range setting of the A/D converter module to
the CPU.
Usable devices
Internal device
(System, user) MELSECNET/H
Direct J \
Constant
Set data
Bit Word
File
register
Bit Word
Special
function
module
U \G
Index
register
Z
K, H S
Other
(S) — — — — —
(D) — — — —
Command
G.OGLOAD
Command
GP.OGLOAD
Un (S) (D)
Un (S) (D)
[Instruction
symbol]
[Execution
condition]
G.OGLOAD
GP.OGLOAD
Set data
Device Description Setting range Data type
Un Start I/O number of the module 0 to FE
H
Binary 16 bits
(S) Start number of the device in which control data is stored.
Within the range of the
specified device
Device name
(D)
Device that is turned ON 1 scan on completion of dedicated
instruction processing.
(D) + 1 also turns ON at an abnormal completion.
Within the range of the
specified device
Bit
Control data
1
of Q64AD-GH (1/2)
Device Item Set data Setting range Set by
(S) System area — — —
(S) + 1 Completion status
Stores the status when the
instruction is complete.
0 : Normal completion
Other than 0: Abnormal completion
— System
(S) + 2 Pass data classification setting
Specify the voltage/current of the
offset/gain values to be read.
0: Voltage specified
1: Current specified
0 0 CH4 CH3 CH2 CH1
b15 b4 b3 b2 b1 b0
to
0000
H
to 000F
H
User
(S) + 3 System area — — —
(S) + 4
(S) + 5
CH1 Industrial shipment settings offset value (L)
(H)
— — System
(S) + 6
(S) + 7 CH1 Industrial shipment settings gain value (L)
(H)
— — System
(S) + 8
(S) + 9 CH2 Industrial shipment settings offset value (L)
(H)
— — System
(S) + 10
(S) + 11
CH2 Industrial shipment settings gain value (L)
(H)
— — System
1 Set only the pass data classification setting (S)+2. If data is written to the area set by the system, the offset/gain values
will not be read properly.