Mitsubishi Fuso CANTER FE85DE6SLGP, Shop Manual

Page: 154 / 336

12
12-25
Service standards (Unit: mm)
Tightening torque (Unit: N·m {kgf·m})
Lubricant and/or sealant
Inspection procedure
Inspection: Oil cooler element
• Plug the outlet of the oil cooler element and connect a hose to
the engine oil inlet port. Then, immerse the oil cooler element in
a tank of water.
• Apply an air pressure of 980 kPa {10 kgf/cm
2
} for 15 seconds
through the hose, and check for any air leaks.
• Replace the element if it leaks air.
Location Maintenance item Standard value Limit Remedy
6
Load of bypass valve spring
(installed length: 48 )
95.3 ± 4.9 N
{9.7 ± 0.5 kgf}
– Replace
8
Air leakage from oil cooler element (air pressure: 980
kPa {10 kgf/cm
2
} for 15 seconds)
0 cm
3
{0 mL} – Replace
Mark Parts to be tightened Tightening torque Remarks
Eyebolt (oil pipe mounting) 21.6 {2.2} –
Plug 34.3 ± 4.9 {3.5 ± 0.5} –
Nut (oil cooler element mounting)
25 ± 5 {2.5 ± 0.5} –
Water drain plug
Engine oil pressure switch 12 {1.2}
• Sealant
• With cold en-
gine
Coolant temperature sensor (for water temperature gage) 35 {3.6}
–
Coolant temperature sensor (for engine control) 34 {3.5}
Mark Points of application Specified lubricant and/or sealant Quantity
O-ring Engine oil As required
Engine oil pressure switch threads ThreeBond 1215 As required
0
-0.5