Mitsubishi Fuso CANTER FE85DE6SLGP, Shop Manual

Page: 243 / 336

13E-56
AE Starter Safety Relay
Starter safety relay drive signal Actuation noise should be
heard.
[Service data]
D3: Starter Safety Relay
AF EDU Relay
Electronic drive unit relay drive signal
(Errors related to exhaust gas recirculation and to the intake
throttle can be detected when this actuator test is executed.)
Operating sound of relay
[Service data]
D4: EDU Power Relay
B0 MIL
Engine warning lamp (orange) drive signal
[Can be executed when the following conditions are satisfied]
• Vehicle: stationary (vehicle speed 0 km/h)
• Transmission: Neutral
• Engine: stopped
ON/OFF condition of warn-
ing lamp (orange)
[Service data]
E0: MIL
B1 Diagnosis Lamp
Engine warning lamp (red) drive signal
[Can be executed when the following conditions are satisfied]
• Vehicle: stationary (vehicle speed 0 km/h)
• Transmission: Neutral
• Engine: stopped
ON/OFF condition of warn-
ing lamp (red)
[Service data]
E1: Diagnosis Lamp
B2 Fuel Leak Check
Rail pressure increased on a constant slope (for 6 seconds)
[Can be executed when the following conditions are satisfied]
• Vehicle: stationary (vehicle speed 0 km/h)
• Transmission: Neutral
• Diagnosis switch: OFF (with fuse removed)
Check that no fuel leaks
from fuel system.
BB Injector Test 1
Selected injector magnetic valve forcibly deactivated
[Can be executed when the following conditions are satisfied]
• Vehicle: stationary (vehicle speed 0 km/h)
• Engine speed: Below 1500 rpm
• Transmission: Neutral
• No active diagnosis code generated
Check that injector mag-
net valve for No. 1 cylinder
stops operating.
BC Injector Test 2
Check that injector mag-
net valve for No. 4 cylinder
stops operating.
BD Injector Test 3
Check that injector mag-
net valve for No. 2 cylinder
stops operating.
BE Injector Test 4
Check that injector mag-
net valve for No. 3 cylinder
stops operating.
No. Item Explanation Confirmation method
TROUBLESHOOTING