Mitsubishi Fuso CANTER FE85DE6SLGP, Shop Manual

Page: 68 / 336

11-30
Rocker Shafts and Rockers
Disassembly sequence
• Although the above illustration includes only the construction of the rockers on the exhaust rocker shaft, the rock-
ers on the intake rocker shaft also has the same construction.
Assembly sequence
Follow the disassembly sequence in reverse.
CAUTION
• The short rockers and long rockers must be installed alternately. Be aware that the order of installation
for the intake rockers is different from the order of installation for the exhaust rockers.
Service standards (Unit: mm)
Tightening torque (Unit: N·m {kgf·m})
Lubricant and/or sealant
Location Maintenance item Standard value Limit Remedy
2, 6,
8, 9
Rocker bushing-to-rocker shaft clearance 0.01 to 0.08 0.12 Replace
3, 7 Rocker (roller) radial play 0.038 to 0.100 – Replace
Mark Parts to be tightened Tightening torque Remarks
Lock nut (adjusting screw stopping) 20.6 {2.1} –
Mark Points of application Specified lubricant and/or sealant Quantity
Rocker bushing inner surface Engine oil As required
1 Adjusting screw
2 Rocker bushing
3 Short rocker
4 Rocker shaft spring
5 Adjusting screw
6 Rocker bushing
7 Long rocker
8 Exhaust rocker shaft
9 Intake rocker shaft
: Hole for camshaft frame locating pin
: Non-reusable parts
ROCKERS AND CAMSHAFTS