11
11-27
Installation procedure
Installation: Camshaft
•
Install the upper camshaft bearing on the camshaft frame and
the lower camshaft bearing on the cylinder head by fitting their
lugs into the notches in the camshaft frame and cylinder head.
•
Place the No. 1 cylinder piston at the top dead center on the
compression stroke.
•
Align the mating marks on the camshaft gears with those on the
camshaft frame when installing the camshafts.
NOTE
• Each camshaft gear also has mating mark “L” or “R” for
alignment with the head idler gear. This mark may not be
exactly aligned with that on the head idler gear, as the posi-
tion that the head idler gear takes when it is installed may
make it impossible to align them. Such a misalignment
does not lead to any undesirable consequences.
Installation: Rocker shafts and camshaft frame
•
Clean the sealant application surfaces on each part.
•
Apply sealant to the entire periphery of the four packings evenly
and without any breaks.
•
Apply sealant to the camshaft frame evenly and without any
breaks.
•
Mount the camshaft frame and packing on the cylinder head
within three minutes of applying the sealant, being careful not to
dislodge the sealant in the process.
CAUTION
• Do not run the engine within one hour of installing the rock-
er shafts and camshaft frame.
Summary of Contents for Fuso CANTER FE85DE6SLGP
