Mitsubishi Fuso CANTER FE85DE6SLGP, Shop Manual

Page: 72 / 336

11-34
Camshafts
Disassembly sequence
1 Intake camshaft gear
2 Key
3 Intake camshaft
4 Exhaust camshaft gear
5 Key
6 Exhaust camshaft
*
a : Sensor plate
: Non-reusable parts
Assembly sequence
Follow the disassembly sequence in re-
verse.
CAUTION
• The exhaust camshaft gear has the
sensor plate. Do not mistake it for
the intake camshaft gear. If the
gears are incorrectly installed, en-
gine malfunction will occur.
Service standards (Unit: mm)
Removal procedure
Removal: Camshaft gears
• Remove the camshaft gear by pushing on the camshaft using a
press.
CAUTION
• Do not use a hammer to remove the camshaft gear. Be sure
to use a press for this purpose.
Location Maintenance item Standard value Limit Remedy
1, 3, 4, 6 Camshaft gear-to-camshaft interference 0.007 to 0.041 – Replace
3 Intake camshaft
Cam lift
Cams for long rockers
Lobe height: 42.219
Base circle diameter: 35.009
7.21 7.16
Replace
Cams for short rockers
Lobe height:44.281
Base circle diameter: 35.012
9.269 9.219
Bend 0.01 0.03 Replace
6
Exhaust
camshaft
Cam lift
Cams for long rockers
Lobe height: 42.279
Base circle diameter: 35.095
7.184 7.134
Replace
Cams for short rockers
Lobe height: 44.359
Base circle diameter: 35.117
9.242 9.192
Bend 0.01 0.03 Replace
ROCKERS AND CAMSHAFTS