12-14
2. Engine Oil Replacement
Tightening torque (Unit: N·m {kgf·m})
Lubricant and/or sealant
WARNING
• Wipe up any spilled engine oil, as it can cause fires.
• To avoid any risk of burns, take care not to touch the engine oil when the engine is hot.
CAUTION
• Make sure not to put any engine oil on the Belt during engine oil replacement. Belts soiled with oil or
grease may easily slip, resulting in deteriorated performance of the cooling system.
[Draining]
•
Before draining out the engine oil, warm up the engine until the
water temperature gauge pointer begins to move.
•
Remove the filler cap.
•
Remove the drain plugs of the oil filter and oil pan to drain out
the engine oil, for 5 minutes or longer.
[Refilling]
•
Tighten the drain plug to the specified torque, then pour a speci-
fied amount of new engine oil into the engine.
•
Run the engine for 1 minute or longer to fill the oil filter with the
engine oil.
•
Stop the engine and check the oil level.
CAUTION
• If the specified quantity is exceeded as a result of addition
of oil, increased oil consumption and/or deteriorated crank-
case emission control system function may result.
Mark
Parts to be tightened
Tightening torque
Remarks
–
Drain plug (oil filter)
9.8 ± 1.96 {1.0 ± 0.2}
–
–
Drain plug (oil pan)
34.3 to 43.1 {3.5 to 4.4}
–
Mark
Points of application
Specified lubricant and/or sealant
Quantity
–
Oil filter
Engine oil (API classification CD,
CE, CF-4, CH-4)
Approx. 1 dm
3
{1 L}
Oil pan
Approx. 8 dm
3
{8 L}
ON-VEHICLE INSPECTION AND ADJUSTMENT
Summary of Contents for Fuso CANTER FE85DE6SLGP
