Mitsubishi Fuso CANTER FE85DE6SLGP, Shop Manual

Page: 268 / 336

14-18
Removal sequence
Installation sequence
Follow the removal sequence in reverse.
CAUTION
• Install each hose clamp to the angle indicated in the illustration so that sufficient clearance is assured be-
tween the hose clamp and its surrounding parts.
Tightening torque (Unit: N·m {kgf·m})
Lubricant and/or sealant
Installation procedure
Installation: Water hose
• Install the water hose with the white mark on its end aligned with
the padding on the water pipe.
Mark Parts to be tightened Tightening torque Remarks
Clamp 3.0 to 4.5 {0.3 to 0.5} –
Clamp 1.5 to 2.0 {0.15 to 0.2} Wet
Clamp 4 {0.4} –
Eyebolt (water pipe mounting) 26 {2.7} –
Bolt (adapter mounting) 23.2 {2.4} –
Eyebolt (water pipe mounting) 25.5 {2.6} –
Mark Points of application Specified lubricant and/or sealant Quantity
Clamp screw threads Engine oil As required
O-ring Soapy water As required
1 Upper radiator hose
2 Lower radiator hose
3 Heater hose
4 Heater pipe
5 Heater hose
6 Heater hose
7 Heater pipe
8 Heater hose
9 Water hose
10 Water hose
11 Water hose
12 Water hose
13 Adapter
14 O-ring
15 Water hose
16 Water hose
17 Water pipe
18 Eyebolt
19 Eyebolt
20 Water pipe
21 Eyebolt
22 Eyebolt
23 Water pipe
24 Eyebolt
25 Eyebolt
26 Water pipe
27 Radiator pipe
28 Radiator hose
*
a : Radiator
* b : Thermostat cover
*
c : Breather cover
* d : Exhaust gas recirculation
valve
* e : Exhaust gas recirculation
cooler
: Non-reusable parts
DISCONNECTION AND CONNECTION OF HOSES AND PIPES