Mitsubishi Fuso CANTER FE85DE6SLGP, Shop Manual

Page: 249 / 336

13E-62
Accelerator pedal switch
A20-B33
A20-B45
Output
[Conditions]
• Starter switch ON
• Vehicle-side harness connected (Perform inspection on back
of connector.)
[Requirements]
• With accelerator pedal pressed: 0 V
• With accelerator pedal not pressed: 5 V
Fuel injection rate
adjustment resistor
A35-A88 Input
[Conditions]
• Starter switch OFF
• Disconnect connector. Perform inspection on vehicle-side con-
nector.
[Requirements]
• No. 1 resistor: 270 ± 13.5
Ω
• No. 2 resistor: 510 ± 25.5
Ω
• No. 3 resistor: 820 ± 41
Ω
• No. 4 resistor: 1300 ± 65
Ω
• No. 5 resistor: 2000 ± 100
Ω
• No. 6 resistor: 3300 ± 165
Ω
• No. 7 resistor: 5600 ± 280
Ω
• No. 8 resistor: 15000 ± 750
Ω
• No. 9 resistor: 390 ± 19.5
Ω
• No. 10 resistor: 4300 ± 215
Ω
• No. 11 resistor: 9100 ± 455
Ω
MPROP
(rail pressure control valve)
A69-A21
A69-A2
A3-A21
A3-A2
Output
[Conditions]
• Starter switch OFF
• Disconnect connector. Perform inspection on vehicle-side con-
nector.
[Requirements]
• 2.6 to 3.15 Ω
Exhaust shutter 3-way
magnetic valve
A76-A6 Output
[Conditions]
• Starter switch ON
• Vehicle-side harness connected (Perform inspection on back
of connector.)
[Requirements]
• With exhaust brake operating: Corresponding to battery volt-
age
• With exhaust brake not operating: 0 V
Intake air temperature
sensor 1
A63-A32 Input
[Conditions]
• Starter switch OFF
• Disconnect connector. Perform inspection on vehicle-side con-
nector.
[Requirements]
• 50
°
C: 2.20 k
Ω
• 100
°
C: 0.51 k
Ω
• 150
°
C: 0.16 k
Ω
Intake air temperature
sensor 2
A29-B30 Input
[Conditions]
• Starter switch OFF
• Disconnect connector. Perform inspection on vehicle-side con-
nector.
[Requirements]
• 0 ° C: 162.3 k Ω
• 20
°
C: 61.47 k
Ω
• 80
°
C: 6.120 k
Ω
Diesel particulate filter
differential pressure sensor
A61-A85
A84-A85
Input
[Conditions]
• Starter switch ON
• Vehicle-side harness connected (Perform inspection on back
of connector.)
[Requirements]
<Power supply voltage>
• 5 V
<Output voltage>
• 1 to 4.5 V
Hardware to be connected Terminal Input/Output Voltage or waveform
+0.405
–0.334
+0.071
–0.061
+0.018
–0.016
+48.8
–36.5
+15.99
–12.35
+1.095
–0.907
TROUBLESHOOTING