TM_s-MEXT_ME28relC_00_12_19_EN
Technical manual
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
18
Mask of the terminal
Description
99.9 99.9 99.9
99.9 99.9 99.9
99.9 99.9 99.9
99.9LAN:Local Unit
Temp.(°C)
Mask that displays all the temperature values read by the units on the LAN network. This mask is displayed only at the Master unit
(pLAN address=1).
Visible if the pLAN is configured
LAN 1: 2: 3:
4: 5: 6:
7: 8: 9:
10:
Local network (LAN) status display mask. This mask is displayed only in the Slave unit (LAN address=2÷10).
Visible if the local network (LAN) is configured
Unit operating
Unit not operating
01 LAN APL
Current 0020 Pa
Target 0020 Pa
APL 0020 Pa
Local 0019 Pa
Status
On target
APL pLAN function operation status display mask. This mask is displayed for all the units (pLAN address=1 to 10).
Visible if the pLAN is configured and the APL function is active
DT 03.0
T.INT T.EXT
24.0 21.0
Status Enabled
Position ALL INTERNAL
000%
Direct Free Cooling function operation display mask.
Visible only if the function is enabled
It shows:
Internal temperature, external temperature, Freecooling enable, damper position (internal only, mix, external only) and its opening
percentage. The image graphically describes the Free Cooling damper position:
000.0kg/h
A 00.0
µS/cm000
Alarm Warning
code:00 code:0
Humidifier
operation status display mask.
Visible if humidifier is present
Energy Managment
Voltages (V) 000
Current (A) 000.0
Active Power(kW)0000.0
Display mask for the values detected by the
network transducer
in case on mono-phase circuit.
Visible if the network transducer is present and configured
Energy Managment
Voltages (V)
L1-L2 000
L2-L3 000
L3-L1 000
Neutral 1 000
Neutral 2 000
Neutral 3 000
Display mask for the electric values detected by the
network transducer
. Displays phase-phase and phase voltage (phase-
neutral) values.
Only for three-phase units
.
Visible if the network transducer is present and configured
Energy Managment
Current (A)
Line 1 000.0
Line 2 000.0
Line 3 000.0
Neutral 000.0
Display mask for the electric values detected by the
network transducer
. Displays phase and neutral current.
Only for three-phase units.
Visible if the network transducer is present and configured
Energy Managment
Active Power (kW)
Phase 1 0000.0
Phase 2 0000.0
Phase 3 0000.0
Total 0000.0
Display mask for the electric values detected by the
network transducer
. The phase active power is displayed
Only for three-phase units.
Visible if the network transducer is present and configured
