Mitsubishi Electric Q80BD-J71GP21-SX, User Manual

Page: 130 / 272

8
CC IE Control UTILITY
8
- 24 8.4 Setting Screen
8.4.7 Event setting screen
*1: Set the device number and device points -1 not to exceed the range of device number.
*2: Cannot be set when the "Event condition" is set to "Change".
*3: The following table indicates the combination of the event settings and timing of the event
occurrence.
POINT
When the multiple events occur at the same time, smaller setting number is the
priority to be notified.
Checks the event settings. — —
Reflects the settings, and closes the "Event
setting" screen.
— —
Without reflecting the settings, closes the
"Event setting" screen.
— —
Device code
Detection
method
Event condition Timing of event occurrence
LB, LX, SB
Level detect ON While ON
Level detect OFF While OFF
Edge detect ON At rising pulse
Edge detect OFF At falling pulse
LW, SW
Level detect Equal When setting values match
Level detect Unequal When setting values mismatch
Edge detect Equal
When setting values match
(for first detection only)
Edge detect Unequal
When setting values mismatch
(for first detection only)
— Change
When previous setting values
mismatch
Item Description Default Setting range
Check
End
Cancel