4 - 6
4. DISPLAY SECTION AND OPERATION SECTION OF THE CONVERTER UNIT
4.5 Parameter mode
4.5.1 Operation example
The following example gives the operation procedure after power-on for use of the regenerative brake
options (MR-RB137).
Press MODE three time
The parameter number is displaed.
Pless UP or DOWN to change the number.
Press UP twice
The set value of the specified parameter
number flickers.
Press UP fourth
During flickering, the set value can be change.
Use UP or DOWN .
Press SET to enter.
( 4: MR-RB137s (3 pcs.) are used)
To shift to the next parameter, press the "UP"/"DOWN" button.
When changing the parameter No.0 setting, change its set value, then swtch power off once and switch it
on again to make the new value valid.
Summary of Contents for Melservo-H Series
