manualshive.com logo in svg

Mitsubishi Electric MELSEC iQ-R16MTCPU, Programming Manual

Share
Download
Mitsubishi Electric MELSEC iQ-R16MTCPU Programming Manual Download Page 196

194

3  PARAMETERS FOR POSITIONING CONTROL
3.7  Expansion Parameters

Acceleration/deceleration time change parameter

The acceleration/deceleration time change parameter arbitrarily changes the acceleration/deceleration time at speed change, 
when changing speed with the Motion dedicated function (CHGV) of Motion SFC program (and also the Motion dedicated 
PLC instruction (M(P).CHGV/D(P).CHGV)).

Acceleration/deceleration time change enable device

Set the device to enable the change of acceleration/deceleration time at a speed change request.
The following describes the operation for ON and OFF of the acceleration/deceleration time change enable device.

New acceleration time value device

Set the device to set the change value when changing the acceleration time at a speed change request.
The following change values are set in the new acceleration time value device.

New deceleration time value device

Set the device to set the change value when changing the deceleration time at a speed change request.
The following change values are set in the new deceleration time value device.

 • When the setting of acceleration/deceleration time change enable device is omitted, change of acceleration/

deceleration time at a speed change request is not executed. When changing acceleration/deceleration 
time at a speed change, set this parameter.

 • When the setting of new acceleration time value device and new deceleration time value device is omitted, 

change of acceleration/deceleration time of the omitted devices is not executed.

Setting value

Details

ON

Speed change is executed at a speed change request by changing the acceleration/deceleration time values in the new acceleration 
time value device and new deceleration time value device.

OFF

Does not change acceleration/deceleration time at a speed change request.

Setting value

Details

1 to 8388608 [ms]

If a speed change request is executed when the acceleration/deceleration time change enable device is ON, speed change is executed 
by changing the acceleration time to the setting value

Other than above

Acceleration time change is disabled, and speed change is maintained at the current acceleration time.

Setting value

Details

1 to 8388608 [ms]

If a speed change request is executed when the acceleration/deceleration time change enable device is ON, speed change is executed 
by changing the deceleration time to the setting value.

Other than above

Deceleration time change is disabled, and speed change is maintained at the current deceleration time.

Summary of Contents for MELSEC iQ-R16MTCPU



































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands