522
8 APPLICATION INSTRUCTION
8.9 Real Number Instruction
Processing details
• These instructions calculate the angle from the sine of the angle specified by (s), and store the operation result in the
device specified by (d).
• The sine value specified by (s) can be set ranging from -1.0 to 1.0.
• The angle (operation result) stored in (d) is expressed in radians (from (-
/2) to (
/2)).
• The table below shows the related devices.
Operation error
For the radian
angle conversion, refer to the DRAD(P) and DDEG(P) instructions.
(
Page 527 Converting single-precision real number angle to radian, Page 529 Converting single-precision
Device
Name
Description
Condition
Operation
SM700
Carry
The absolute value of the operation result
2
128
The value of (d) is the maximum value (2
128
) of 32-bit real
numbers and the carry flag SM700 turns on.
SM8020
Zero
The operation result is true "0".
(The mantissa part is "0").
The zero flag SM8020 turns on.
SM8021
Borrow
The absolute value of the operation result < 2
-126
The value of (d) is the minimum value (2
-126
) of 32-bit real
numbers and the borrow flag SM8021 turns on.
SM8022
Carry
The absolute value of the operation result
2
128
The value of (d) is the maximum value (2
128
) of 32-bit real
numbers and the carry flag SM8022 turns on.
Error code
(SD0/SD8067)
Description
3402H
The specified device value is -0, denormalized number, NaN (not a number), or
.
3405H
A value specified in (s) is outside the range from -1.0 to 1.0.
(s)+1
(s)
(d)+1
(d)
SIN
-1
( )
Single-precision real number
Single-precision real number
Summary of Contents for MELSEC iQ-F FX5
