Mitsubishi Electric MELSEC iQ-F FX5, Programming Manual

Page: 117 / 1112

6 SEQUENCE INSTRUCTIONS
6.3 Output Instructions
115
6
Timer
OUT T, OUTH T, OUTHS T, OUT ST, OUTH ST, OUTHS ST
The timer counts up to the set value when the operation result up to the OUT instruction is ON and the coil of the timer/
retentive timer specified by (d) turns ON. When the timer times up, NO contact becomes conductive and NC contact becomes
non conductive.
Setting data
■
Descriptions, ranges, and data types
*1 In the case of the ST language and the FBD/LD language, d displays as Coil.
*2 In the case of the ST language and the FBD/LD language, Set value displays as Value.
*3 Only timer type/retentive timer type label can be used.
*4 In the case of the OUT_T instruction of the ST language and the FBD/LD language , data type is ANY_INT.
■ Applicable devices
*1 Only T and ST can be used.
*2 T, ST, C cannot be used.
*3 Only decimal constant (K) can be used.
Processing details
• These instructions count up to the set value when the operation result up to the OUT instruction is ON and the coil of the
timer/retentive timer specified by (d) turns ON. When the timer reaches the end of its count (current value

set value), NO
contact becomes conductive and NC contact becomes non-conductive.
• Operation is as follows when the operation result up to the OUT instruction changes from ON to OFF.
Ladder diagram Structured text
ENO:=OUT_T(EN,Coil,Value);
ENO:=OUTH(EN,Coil,Value);
ENO:=OUTHS(EN,Coil,Value);
FBD/LD
("OUT_T", "OUTH", "OUTHS" enters

.)
Operand Remarks Range Data type Data type (label)
(d)
*1
Timer Number

Timer/retentive timer ANY
*3
(Set value)
*2
Timer set value 0 to 32767 16-bit unsigned
binary
*4
ANY16
*4
EN Execution condition  Bit BOOL
ENO Execution result

Bit BOOL
Operand Bit Word Double word Indirect
specification
Constant Others
X, Y, M, L, SM,
F, B, SB, S T, ST, C, D, W,
SD, SW, R U  \G  Z LC LZ K, H E $
(d)  
*1
        
(Set value)
 
*2
     
*3
  
Timer type Timer coil Current timer
value Before time-out After time-out
NO contact NC contact NO contact NC contact
Timer off 0 Non-Conductive
state Conductive state Non-Conductive
state Conductive state
Retentive timer off Holds current value Non-Conductive
state Conductive state Conductive state Non-Conductive
state
(d)
Value
EN ENO
Coil
Value