Mitsubishi Electric MELDAS 600M Series, Instruction Manual

Page: 465 / 512

CHAPTER 4 APPENDICES
Appendix 2. Operation Messages
IV
– 23
2.17 Maintenance-related operation messages
Message Details
Execute? (Y/N)
•
Message to confirm the operation.
[Y] or [INPUT] : Execute the operation.
[N]
: Do not execute the operation.
Executing format
•
The formatting is being executed correctly.
Format complete
•
The formatting completed correctly.
Format error
•
The NC memory formatting failed.
→
Contact the nearest service center.
Format NC memory?
(Y/N)
•
Message to confirm the operation.
[Y] or [INPUT] : Start formatting the NC memory.
[N]
: Do not format the NC memory.
Quite HMI? (Y/N)
•
Message to confirm the operation.
[Y] or [INPUT] : Quit the HMI.
[N]
: Do not quit the HMI.
Password is illegal
•
The input password is incorrect.
Input the password
•
The [Password] menu key was pressed, and the password input mode
was entered.
→
Input a password.
Execute SRAM
backup? (Y/N)
•
Confirmation of operations.
[Y] or [INPUT] : Backup the SRAM data on the HD.
[N] : Do not backup the SRAM data on the HD.
Executing backup
•
The SRAM data is being backed up on the HD.
Backup complete
•
Backup of the SRAM data on the HD has been completed.
Backup error
•
An error occurred while backing up the SRAM data on the HD.
2.18 Other operation messages
Message Details
Setting error
•
The setting data is inadequate. (Alphabetic characters were set where
only numeric characters can be set, etc.)
•
The data has not been set.
Data protect
•
Setting, erasing, etc., of the various data is prohibited, because the
DATA PROTECT key is validated.
Launching application
•
The application is running.
Downloaded from ManualsNet.com search engine