Mitsubishi Electric MELDAS 600M Series, Instruction Manual

Page: 293 / 512

CHAPTER 1 SCREEN OPERATIONS
5. Diagnosis Screens
I
– 278
(2) Menus
Menu Details Type Reference
Line
clear
This erases the information in the line where the
cursor is at. (One entire line becomes blank.) The
cursor does not move at this time.
C –
Data
read
The contents of the set address data (Addr, Object
No./Item No./Data No./Size/Display format) for all the
lines is constantly displayed.
The Data No. highlight (indicating data is being set) is
released.
The cursor appears in "Addr" of that line.
C
Data
write
This writes the data
(Note)
in the setting area to the NC
memory indicated by address data at the cursor
position.
The Data No. highlight (indicating data is being set) is
released, and constant display is started.
After writing, the cursor moves to "Addr" of the next
line.
A
5.5.1 Writing/
reading the data
using the NC
data designation
Continu
display
Based on the "Addr" and "Size" data of the line where
the cursor is at, the address contents are
continuously displayed from the cursor line.
When NC data is designated, the data is continuous
data to which the data Nos. are added.
The cursor moves to "Addr" of that line.
C –
(Note) Decimal, hexadecimal and floating point data writing is possible.
Decimal : Integers without decimal points......... (Ex.) –1234
Hexadecimal : An "H" is necessary at the end.......... (Ex.) 1234H
Floating point data : Data with a decimal point ................ (Ex.) –12.3
Downloaded from ManualsNet.com search engine