Mitsubishi Electric MELDAS 600M Series Instruction Manual Download Page 287

Page: 287 / 512

CHAPTER 1 SCREEN OPERATIONS

5. Diagnosis Screens

– 272

5.4.3 Display items for the power supply unit

The various data related to the power supply is monitored.
Change the display items using the

key and

key to refer to the data.

Display item

Details

Unit type

This displays the power supply unit type.

Unit serial No.

This displays the serial No. of the power supply unit.

Software version

This displays the software version.

Connected drive

This displays the driver connected to each power supply unit.

Work time

This displays the READY ON cumulative time. (Units: 1hr)

Alarm hist
1 : Time
1 : Alarm to 8 : Alarm

This displays servo alarms that occurred in latest order with the following
formats.

Alarm No. : Number of the servo alarms that occurred.
Time

: Work time when the alarm occurred.

Maint hist 1 to 4

This displays the maintenance dates.

Year : One digit
Month : 1 to 9, X (Oct.), Y (Nov.), Z (Dec.)

/SYS

This displays the NVRAM status.

Downloaded from

ManualsNet.com

search engine

Summary of Contents for MELDAS 600M Series

































































































































































































































































































































































































































































































































Search results

Summary of Contents for MELDAS 600M Series

Reviews:

Mitsubishi Electric MELDAS 600M Series, Instruction Manual, Page: 287 / 512

Search results

Summary of Contents for MELDAS 600M Series

Reviews: