Mitsubishi Electric MELDAS 600M Series, Instruction Manual

Page: 134 / 512

CHAPTER 1 SCREEN OPERATIONS
3. Setup Screens
I
– 119
Display item Details
3. G92/G52 area
This displays the offset amount for G92 or the local coordinate system.
The offset amount of the corresponding local coordinate system (G52) is
displayed only when the cursor is at G54 to G59.
4. Absolute/
incremental selection
This indicates whether the absolute value setting mode or incremental
value setting mode is selected.
5. Manual value setting This displays the command values of each M (miscellaneous function
command value) and T (tool command value).
Refer to "1.5.1 Setting a manual value command" for more details on the
manual value command.
6. Counter display area This displays the counter (machine position, program zero point, error
compensation value). (These cannot be set.) These values are used
during operation to confirm the zero point position of the selected
coordinate system.
(2) Menu
Menu Details Type Reference
Coord
G54-G59
This displays the G54 to G59 offset. The cursor
moves to the G54 offset data. This menu can be used
when the G54 to G59 offset data is not displayed.
C
3.2.1 Setting the
coordinate system
offset data
Coord
G54.1P_
If the P No. to be displayed on the screen is input, this
displays the coordinate system offset data area and
expansion workpiece coordinate (G54.1 Pn) offset data.
If the local coordinate offset (G52) is displayed in the
G92/G52 area, the display will change to the G92
display.
A –
Coord
G92/G52
This displays the G92 or G52 coordinate system
offset data. The G92 offset data is also displayed
when the cursor is not at the G54 to G59 offset data.
C –
Abs/Inc
This changes the setting mode to the absolute value
mode or incremental value mode. The absolute value
setting mode is entered when the power is turned ON.
C
1.5.3 Changing the
absolute value/
incremental value
setting
All axs
clear
This erases the local offset data for all axes
corresponding to the offset data of the coordinate
system where the cursor is located.
C
3.2.2 Erasing the
coordinate system
offset data (1)
ALL
clear
This erases all offset data (G54 to G59, and
expansion data), and the local offset data.
C
3.2.2 Erasing the
coordinate system
offset data (2)
Easy
setting
This sets the coordinate system offset so that the
current machine coordinate value becomes the
workpiece coordinate zero point.
Only the axis at the cursor position is set.
C
3.2.3 Setting the
workpiece
coordinate zero
point
Counter
type
This displays the submenu for changing the display
counter.
C
2.1.1 Changing the
counter display
Manual
value
Random values can be input in each data item of M
and T on the screen. When the numeric value is input,
the selected M and T functions are executed. When
the menu key is pressed again, the mode quits and
the menu highlight returns to normal. The cursor
moves to the coordinate system offset data area.
A
1.5.1 Setting a
manual value
command
Downloaded from ManualsNet.com search engine