Mitsubishi Electric MELDAS 600M Series, Instruction Manual, Page: 322 / 512

CHAPTER 1 SCREEN OPERATIONS
6. Maintenance Screens
I
– 307
6. Maintenance Screens
Maintenance-related menus include the menu
Mainte
for selecting maintenance-related screens, and
the menu
Ladder monitor
for displaying the Ladder monitor screen.
When the menu
Ladder monitor
is pressed:
The screen changes to the On-board screen. Refer to the section "6.4 On-board screen".
(Note) With the MELDAS610M/630M, the Custom Release screen can also be displayed by
setting the parameters.
When the menu
Mainte
is pressed.
The following menus appear.
Menu Details Type Reference
Psswd
input
This changes the screen related to the maintenance
by setting the password.
A –
PLC
stop
This forcible stops the PLC ladder process. If this
menu key is pressed in the stopped state, the stop is
canceled.
C
6.1 Maintenance
screen
(1) Display items
1. PLC stop
state
To
Abs pos
This changes the screen to that for setting the absolute
position zero point.
C
6.2 Absolute
Position Setting
screen
AUX
test
This changes the screen to that for testing the auxiliary
axis operation.
C
6.3 AUX test
operation screen
Option
setting
This sets the options.
C
–
Format
This formats the NC memory.
B –
To
In/out
This changes the screen to the Data Input/Output
screen.
C
3.3 Data Input/
Output screen
To
param
This changes the screen to the Parameter screen.
C
3.4 Parameter
screens
SRAM
backup
This backs up the NC SRAM information in a file
(SRAM.DAT) on the HD.
B
−
HMI
Quit
This quits the screen operation.
B –
Downloaded from ManualsNet.com search engine