Mitsubishi Electric MELDAS 600M Series, Instruction Manual, Page: 154 / 512

CHAPTER 1 SCREEN OPERATIONS
3. Setup Screens
I
– 139
3.3.6 Creating a directory
This section explains the method of creating a directory.
Refer to "3.3.1 Selecting a device, directory and file" for the method of designating a device, directory and
file.
(1) Creating a directory
1)
2)
The designated details appear.
A directory can be created for the HD, IC card and FLD
devices.
3)
The designated details appear.
4)
The designated details appear.
5)
The designated directory is created.
The directory can also be created in file setting area B.
(Note 1)
Up to 223 files, including the directory, can be registered in the FLD's root directory.
(Note 2)
Up to 511 files, including the directory, can be registered in the IC card's root directory.
(512 files can be registered when volume labels are not used. However, if the "File open
error" occurs when the 512th file is registered, the operation message is not an "File open
error" but a "File entry over".)
(Note 3)
An error will occur if the IC card is not mounted.
Press the menu
Area change
, and select file
setting column A.
Designate the device.
Designate the directory where
the new directory is to be
created.
Set the new directory in file
setting column A.
Press the menu
Dir create
.
Downloaded from ManualsNet.com search engine