19.1 Boot OS and Basic System Application to be Installed
19 - 1
19
INST
AL
LA
TION OF Boot
O
S
AND BASIC SYSTEM
APPLICA
T
ION
19. INSTALLATION OF Boot OS AND BASIC SYSTEM APPLICATION
To execute the GOT utility, install the Boot OS and system applications on the C drive (built-in flash memory) of the GOT, or
set the boot drive of the package data to [A: Standard SD card] and insert an SD card with the package data into the GOT.
(Boot OS is installed in the GOT at factory shipment. It is not necessary to install Boot OS when upgrading of it is
unnecessary.)
This chapter explains the installation using GOT.
Refer to the following for the installation which uses GT Designer3.
➠
GT Designer3 (GOT2000) Help
19.1 Boot OS and Basic System Application to be Installed
Under-mentioned Boot OS and basic system application are necessary to execute utility.
System application name
Function overview
Boot OS
Required for the control of GOT and the communication between PC and GOT.
Installed at factory shipment.
(Boot OS can also be installed from GT Designer3. When Boot OS is installed, the GOT is initialized and
goes to the status at factory shipment. When Boot OS needs to be reinstalled, the basic system application
has to be installed in the GOT.)
System application
Required for the GOT operation as the monitoring function of GOT, installation and deletion of the system
application or project data, touch key control or display function of the screen and guidance.
Required for display and operation of the user-created screen and utility screen.
Not installed in GOT at factory shipment.
Install it from GT Designer3 or an SD card.
The GOT can starts without a
package data installed.
Install the SD
card in GOT
Set the OS boot drive to
[A: Standard SD card].
Install the SD
card in GOT
SD card
Install from GOT to GOT
using a SD card.
SD card
Package data
install
GOT
GT Designer3 SD card GOT
GOT SD card GOT
Write
package data
Package data
upload
GT Designer3
GOT
GOT
Summary of Contents for GOT SIMPLE GS2107-WTBD
