Mitsubishi Electric GOT SIMPLE GS2107-WTBD, User Manual

Page: 74 / 292

11 - 4
11.1 Standard I/F Setting
11.1.4 Detail information setting operation
■1.
For Standard I/F-1(RS422) and Standard I/F-2(RS232)
Step 1.
Touch each driver display box of the standard
I/F-1 and standard I/F-2.
Step 2.
The screen jumps to the detailed information
screen and the communication parameter will
appear.
Step 3.
Touch the numerical values of baud rate to
switch them repeatedly.
The numerical values are set using the ten-
key depending on the setting.
"0" to "9":
Use these keys to enter numerical values.
Enter "0" to disable the screen saver function.
"ESC":
Closes the ten-key window without saving any
value entered
"AC":
Deletes the entire string of numerical
characters that are being entered
"DEL":
Deletes a digit from a string of numerical
characters that are being entered
"ENT":
Enters the value for the clock that has been
entered and closes the ten-key pad window
"+/-":
Switches between positive and negative
values (Only positive values are valid for the
clock setting.)
".":
Invalid key (not used)
Touch [Driver display BOX].
Ex. 4800bps 9600bps 19200bps