Mitsubishi Electric GOT SIMPLE GS2107-WTBD, User Manual

Page: 80 / 292

11 - 10
11.2 GOT IP Address Setting
11.2.3 Setting operation
Step 1.
Touch the numerical part of the octet to
be changed among the 1st to 4th octets.
Step 2.
When the ten-key pad appears, enter a
numerical value in up to 3 digits, and
touch the
key.
If a numerical value outside the setting
range is entered, the following error
message appears. Enter a numerical
value again.
For the details of the setting range, refer
to the following.
➠
16.3.1 Specifications
Step 3.
If necessary, change the setting of [Per.
S/W port No.] and [Transparent port
No.].
Step 4.
After the setting change, touch the [×]
key.
Step 5.
When the screen shown on the left
appears, touch the [YES] key.
Touch the numerical part
of the octet to be changed.
Touch
Touch[×]
Touch [YES]