Mitsubishi Electric GOT SIMPLE GS2107-WTBD, User Manual

Page: 76 / 292

11 - 6
11.1 Standard I/F Setting
■2.
For Standard I/F-4(Ethernet)
POINT POINT POINT
Communication parameter setting by drawing software
Set the communication parameter for each communication driver by selecting [Common]
[Controller Setting].
➠
GT Designer3 (GOT2000) Help
Step 1.
Touch the driver display box of a
communication parameter to be set.
Step 2.
The screen is switched to the
communication detail setting. Set the
communication parameter on this
screen.
GOT IP address setting
➠
11.2 GOT IP Address Setting
Step 3.
When the [ ] button is touched, it
returns to the previous screen.
Step 4.
Touch the [ ] button to display the
window confirming whether to save the
settings.
Step 5.
Touch the [YES] button to save the
settings and restart. Touch the [NO]
button to discard the changes.