54
7.4
Read of Settings
This function reads the settings of the parent terminal of control unit.
It is useful when the verification result is mismatch at
or when the backup is executed for
settings written to the parent terminal.
*This function is available when the parent terminal is in the STOP status of control operation.
If you attempt to execute it in the RUN status, a message will appear to ask whether to execute after the status is changed
to STOP.
*If the read of the parent terminal settings is executed, the settings of the selected system on Control Unit Engineering Tool
will be overwritten and not be returned to their previous values.
(1) Connect the parent terminal and the computer with a LAN cable.
*The
computer’s IP address should be set in order to be in the same network.
(2) Enter the password of the parent terminal.
*For the password, refer to
(3) Click the
Reading
button to read the settings from the parent terminal.
(4) After the read, the following message appears.
Click the
OK
button to close the window.
