115
(4) Set the present time to the
Date and time to set
field.
With any one of year, month, day, hour, minute, or second selected, enter the number or click the
▲
or
▼
button to
change the number.
(5) Enter a password.
For the password, refer to
(6) Click the
Configuration
button to set the present time for the parent terminal.
(7) After the settings have been completed, the following message appears.
Click the
OK
button to close the message.
10.3
Change of Password
You will change the maintenance password of the control unit.
*The control unit does not have any function of password reset or initialization of all settings.
Therefore, do not forget a new password after change.
*This function is available when the parent terminal is in the STOP status of control operation.
If you attempt to execute it in the RUN status, a message will appear to ask whether to execute after the status is changed
to STOP.
(1) Select a terminal to change the password.
The selected terminal is displayed in blue.
