10
3.2 Basic Configuration
*1: The number of contact output/analog output to control equipement or devices varies depending on the control type or
the number of control units in the system.
For details, refer to the appropriate section for each control type.
・
Interlocking control
→
・
Compressor control
→
・
Schedule control
→
*2: To set up the extension units, the optional small type display unit is required.
For the precautions for system configuration using the extension units or small type display unit, refer to
Precautions for System Configuration
Control unit
(Parent terminal)
PC
Ethernet
Control Unit Engineering Tool
(EMU4-KNET)
Current sensor
Production
equipment
Flowmeter
Extension unit *2
Equipment / Device *1
Circuit measurement
(Current, Voltage, etc.)
Analog input
Contact input
(Pulse, Contact)
Control operation by external output
(Contact output/Analog output)
The setting for extension unit
The control status/
Measurement value monitoring
Measuring
<Settable control type>
・
Interlocking control
・
Schedule control
Small type display unit
(EMU4-D65) *2
The setting for control unit
