63
Registering/Changing the Interlocking Control Setting (Contact Output)
(1) Select a terminal
’s output to set from the left table on the window.
The selected field is displayed in blue.
(2) Enter an output name.
A maximum of 30 characters are allowed in the input field.
(3) Register a conditional expression to set the contact to ON.
Click the
...
button.
The following window appears.
On the above window, the conditional expression is set up to determine the ON/OFF contact output.
There are two patterns for conditional expression as the following table.
Comparison method
Details
Measurement value comparison
A method to compare a measurement value measured by the extension unit
with the constant or other measuring point.
Contact state comparison
A method to compare whether the contact input state measured by the
extension unit is ON or OFF.
