81
Registering the Compressor Setting
You will register the settings for compressors to be controlled and for upper/lower limit monitoring.
(1) Click the
compressor
tab on the top of the window.
The following window appears.
(2) Set the number of compressors to be controlled.
Clicking the
Add
button adds a new compressor to the bottom of the table.
By clicking the
Delete
button, the selected compressor, which is displayed in blue, is deleted.
The settable number is two to four units.
*The control units more than the compressors must be registered in the system.
For details, refer to
ID
