21
Wiring for Interlocking Control
*To comply with the UL standards, fuses must be used.
For the fuses, use P405H produced by Daito Communication Apparatus or its equivalent.
*For the wiring length between each output terminal and the equipment, refer to
Contact output 1
Contact output 2
Contact output 3
RS-485
（
MODBUS RTU
）
Fuse 0.5 A
Equipment A
Equipment B
Equipment C
Equipment D
(+)
(-)
(+)
(-)
(-)
(+)
(-)
(-)
(+)
(-)
EMU4-CNT-MB
Analog output
*Connect to either of the output-side
terminals: current output of AY (A) and
COM AY (A) or voltage output of AY (V) and
COM AY (V) depending on the application.
