Mitsubishi Electric City Multi R2 Series, Manual

Page: 99 / 248

S-Series
PUMY-P VKM5(-BS)
Notes:
*1,*2 Nominal conditions
Indoor Outdoor Pipe length Level difference
*3 10 to 52ºC D.B. [50 to 126ºF D.B.], when connecting following models: PKFY-P10/15/20/25/32VLM, PFFY-P20/25/32VKM, PFFY-P20/25/32VLE(R)M and PEFY-P25/32/40VMA3;
and M-Series, S-Series, and P-Series type indoor unit.
*4 -15 to 52ºC D.B. [5 to 126ºF D.B.], when using an optional air protect guide [PAC-SH95AG-E]. However, this condition does not apply to the indoor unit listed in*3.
*5 Cooling mode/Heating mode
*6 External static pressure option is available (30 Pa/3.1 mmH2O). To use this option, PAC-SJ71FM-E is needed.
*7 When connecting 7 indoor units via branch box, connectable CITY MULTI indoor units are 3; connecting 8 indoor units via branch box, connectable CITY MULTI indoor units are 2.
*8 At least two indoor unit must be connected when using branch box.
*Nominal condition *1,*2 are subject to ISO 15042.
*Due to continuing improvement, above specification may be subject to change without notice.
Indoor Outdoor Pipe length Level difference
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB(95ºF DB) 7.5m (24-9/16ft.) 0m (0ft.)
Heating 20ºC DB(68ºF DB) 7ºC DB/6ºC WB(45ºF DB/43ºF WB) 7.5m (24-9/16ft.) 0m (0ft.)
Model PUMY-P112VKM5 (-BS) PUMY-P125VKM5 (-BS) PUMY-P140VKM5 (-BS)
Power source 1-phase 220-230-240V 50Hz,
220-230V 60Hz
1-phase 220-230-240V 50Hz,
220-230V 60Hz
1-phase 220-230-240V 50Hz,
220-230V 60Hz
Cooling capacity *1 kW 12.5 14.0 15.5
(Nominal) *1
BTU / h 42,650 47,768 52,886
Power input kW 2.79 3.46 4.52
Current input A 12.87-12.32-11.80, 12.87-12.32 15.97-15.27-14.64, 15.97-15.27 20.86-19.95-19.12, 20.86-19.95
EER kW / kW 4.48 4.05 3.43
Temp. range of Indoor temp.
W.B. 15.0~24.0°C(59~75°F) 15.0~24.0°C(59~75°F) 15.0~24.0°C(59~75°F)
cooling Outdoor temp.*3,*4 D.B. -5.0~52.0°C(23~126°F) -5.0~52.0°C(23~126°F) -5.0~52.0°C(23~126°F)
Heating capacity *2 kW 14.0 16.0 18.0
(Nominal) *2 BTU / h 47,768 54,592 61,416
Power input
kW 3.04 3.74 4.47
Current input A 14.03-13.42-12.86, 14.03-13.42 17.26-16.51-15.82, 17.26-16.51 20.63-19.73-18.91, 20.63-19.73
COP kW / kW 4.61 4.28 4.03
Temp. range of Indoor temp. D.B. 15.0~27.0°C(59~81°F) 15.0~27.0°C(59~81°F) 15.0~27.0°C(59~81°F)
heating Outdoor temp.
W.B. -20.0~15.0°C(-4~59°F) -20.0~15.0°C(-4~59°F) -20.0~15.0°C(-4~59°F)
Indoor unit
connectable
Total capacity 50~130 % of outdoor unit capacity 50~130 % of outdoor unit capacity 50~130 % of outdoor unit capacity
Model /
Quantity
CITY MULTI P10-P140/9 P10-P140/10 P10-P140/12
Branch box *8 P15-P100/8 P15-P100/8 P15-P100/8
Mixed
system
Branch box
1 unit *8
CITY MULTI P15-P140/5 P15-P140/5 P15-P140/5
Branch box P15-P100/5 P15-P100/5 P15-P100/5
Branch box
2 units *8
CITY MULTI P15-P140/3 or 2 *7 P15-P140/3 P15-P140/3
Branch box P15-P100/7 or 8 *7 P15-P100/8 P15-P100/8
Sound pressure level *5
(measured in anechoic room)
dB <A> 49/51 50/52 51/53
Sound power level *5
(measured in anechoic room)
dB <A> 69/71 70/72 71/73
Refrigerant piping Liquid pipe mm (in.) 9.52(3/8) 9.52(3/8) 9.52(3/8)
diameter Gas pipe
mm (in.) 15.88(5/8) 15.88(5/8) 15.88(5/8)
FAN Type x Quantity
Propeller Fan x 2 Propeller Fan x 2 Propeller Fan x 2
Air flow rate m
3
/min 110 110 110
L/s 1,833 1,833 1,833
cfm 3,884 3,884 3,884
Motor output
kW 0.074 + 0.074 0.074 + 0.074 0.074 + 0.074
*6 External static press. 0 0 0
Compressor Type x Quantity Scroll hermetic compressor x 1 Scroll hermetic compressor x 1 Scroll hermetic compressor x 1
Starting method
Inverter Inverter Inverter
Motor output
kW 2.9 3.5 3.9
External finish
Galvanized Steel Sheet
Munsell No. 3Y 7.8/1.1
Galvanized Steel Sheet
Munsell No. 3Y 7.8/1.1
Galvanized Steel Sheet
Munsell No. 3Y 7.8/1.1
External dimension HxWxD
mm 1,338 x 1,050 x 330 (+40) 1,338 x 1,050 x 330 (+40) 1,338 x 1,050 x 330 (+40)
in. 52-11/16 x 41-11/32 x 13 (+1-9/16) 52-11/16 x 41-11/32 x 13 (+1-9/16) 52-11/16 x 41-11/32 x 13 (+1-9/16)
Protection
devices
High pressure protection High pressure Switch High pressure Switch High pressure Switch
Inverter circuit (COMP./FAN)
Overcurrent detection,
Overheat detection (Heat sink thermistor)
Overcurrent detection,
Overheat detection (Heat sink thermistor)
Overcurrent detection,
Overheat detection (Heat sink thermistor)
Compressor Compressor thermistor,
Overcurrent detection
Compressor thermistor,
Overcurrent detection
Compressor thermistor,
Overcurrent detection
Fan motor
Overheating, Voltage protection,
Overcurrent detection
Overheating, Voltage protection,
Overcurrent detection
Overheating, Voltage protection,
Overcurrent detection
Refrigerant Type x original charge R410A 4.8kg R410A 4.8kg R410A 4.8kg
Net weight kg (lbs) 123(271) 123(271) 123(271)
Heat exchanger
Cross Fin and Copper tube Cross Fin and Copper tube Cross Fin and Copper tube
HIC circuit (HIC: Heat Inter-Changer)
HIC circuit HIC circuit HIC circuit
Defrosting method Reversed refrigerant circuit Reversed refrigerant circuit Reversed refrigerant circuit
Optional parts
Joint: CMY-Y62-G-E
Header: CMY-Y64/68-G-E
Fan motor: PAC-SJ71FM-E
Air protect guide: PAC-SH95AG-E
Joint: CMY-Y62-G-E
Header: CMY-Y64/68-G-E
Fan motor: PAC-SJ71FM-E
Air protect guide: PAC-SH95AG-E
Joint: CMY-Y62-G-E
Header: CMY-Y64/68-G-E
Fan motor: PAC-SJ71FM-E
Air protect guide: PAC-SH95AG-E
99
VRF
Y-Series
VRF
Lineup
VRF
R2-Series
VRF
Zubadan
VRF
WY-Series
VRF
WR2-Series
VRF
S-Series
VRF
Indoor Units
Ventilation
Systems
Technologies and Functions
Remote Controller
Hot Water Solution
VRF
BC Controllers
VRF
S-Series
SPECIFICATIONS