Mitsubishi Electric City Multi R2 Series, Manual

Page: 40 / 248

Notes:
*1,*2 Nominal conditions (subject to JIS B8615-1,-2)
*3 In case of connecting PLFY-P**VEM type indoor unit
*4 Cooling mode / Heating mode
*5 The sound pressure level measured by the conventional method in JIS for reference purpose.
*6 External static pressure option is available (30 Pa, 60 Pa, 80 Pa/3.1 mmH
2
O, 6.1 mmH
2
O, 8.2 mmH
2
O).
Consult your dealer about the specifi cation when setting External static pressure option.
*Due to continuing improvement, above specifi cations may be subject to change without notice.
Indoor Outdoor Pipe length Level diff erence
Cooling
27ºC DB/19ºC WB
(81ºF DB/66ºF WB)
35ºC DB/24ºC WB
(95ºF DB/75ºF WB)
7.5m (24-9/16ft.) 0m (0ft.)
Heating 20ºC DB(68ºF DB) 7ºC DB/6ºC WB(45ºF DB/43ºF WB) 7.5m (24-9/16ft.) 0m (0ft.)
Model PUHY-EP1350YSNW-A1 (-BS)
Power source 3-phase 4-wire 380-400-415 V 50/60 Hz
Cooling capacity *1,*3 kW 150.0
BTU / h 511,800
Power input
kW 41.55
Current input A 70.1-66.6-64.2
EER kW / kW 3.61
Temp. range of Indoor W.B. 15.0~24.0°C (59~75°F)
cooling Outdoor
D.B. -5.0~52.0°C (23~126°F)
Heating capacity *2,*3 kW 168.0
BTU / h 573,200
Power input kW 46.53
Current input
A 78.5-74.6-71.9
COP kW / kW 3.61
Temp. range of Indoor D.B. 15.0~27.0°C (59~81°F)
heating Outdoor W.B. -20.0~15.5°C (-4~60°F)
Indoor unit Total capacity
50~130% of outdoor unit capacity
connectable Model / Quantity P10~P250/3~50
Sound pressure level
(measured in anechoic room) *4,*5 dB <A>
70.5/74.5
Sound power level
(measured in anechoic room) *4 dB <A>
89/93
Refrigerant piping Liquid pipe mm (in.) 19.05 (3/4) Brazed
diameter Gas pipe mm (in.) 41.28 (1-5/8) Brazed
Set Model PUHY-EP450YNW-A1 (-BS) PUHY-EP450YNW-A1 (-BS) PUHY-EP450YNW-A1 (-BS)
FAN Type x Quantity Propeller fan x 2 Propeller fan x 2 Propeller fan x 2
Air fl ow rate m 3 /min 305 305 305
L/s 5,083 5,083 5,083
cfm 10,770 10,770 10,770
Control, Driving mechanism Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor Inverter-control, Direct-driven by motor
Motor output
kW 0.46 x 2 0.46 x 2 0.46 x 2
*6 External static press.
0 Pa (0 mmH
2
O) 0 Pa (0 mmH
2
O) 0 Pa (0 mmH
2
O)
Compressor Type Inverter scroll hermetic compressor Inverter scroll hermetic compressor Inverter scroll hermetic compressor
Starting method Inverter Inverter Inverter
Motor output kW 11.1 11.1 11.1
Case heater
kW
– – –
External fi nish Pre-coated galvanized steel sheets (+powder coating for -BS type)
<MUNSELL 3Y 7.8/1.1 or similar>
External dimension HxWxD mm 1,858 (1,798 without legs) x 1,240 x 740 1,858 (1,798 without legs) x 1,240 x 740 1,858 (1,798 without legs) x 1,240 x 740
in.
73-3/16 (70-13/16 without legs)
x 48-7/8 x 29-3/16
73-3/16 (70-13/16 without legs)
x 48-7/8 x 29-3/16
73-3/16 (70-13/16 without legs)
x 48-7/8 x 29-3/16
Protection devices High pressure protection High pressure sensor, High pressure switch at 4.15 MPa (601 psi)
Inverter circuit (COMP./FAN) Over-current protection Over-current protection Over-current protection
Compressor – – –
Fan motor
– – –
Refrigerant Type x original charge R410A x 10.8 kg (24 lbs) R410A x 10.8 kg (24 lbs) R410A x 10.8 kg (24 lbs)
Net weight kg (lbs) 303 (668) 303 (668) 303 (668)
Heat exchanger
Salt-resistant cross fi n & aluminium tube Salt-resistant cross fi n & aluminium tube Salt-resistant cross fi n & aluminium tube
Pipe between unit Liquid pipe mm (in.) 15.88 (5/8) Brazed 15.88 (5/8) Brazed 15.88 (5/8) Brazed
and distributor Gas pipe mm (in.) 28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed 28.58 (1-1/8) Brazed
Optional parts
Outdoor Twinning kit: CMY-Y300VBK3
Joint: CMY-Y102SS/LS-G2, CMY-Y202/302S-G2
Header: CMY-Y104/108/1010-G
Y-Series
High efficiency
PUHY-EP YSNW-A1(-BS)
40
SPECIFICATIONS