Version：504600180308
１
JB-FSD-9082 Fire Indicating Panel
-----------
-
Please read this operation manual carefully before installing and using the product.
-----------
. Introduction
Ⅰ
JB-FSD-9082 Fire Indicating Panel
（
hereinafter referred to as Fire Indicating
Panel
）
is a microprocessor-controlled fire indicating panel, which is developed
and produced by Fanhai Sanjiang. The fire indicating panel is connected with
fire alarm control panel through RS485 bus line. Each floor can be installed with
a fire indicating panel , and when a detector or module triggers the alarm, the fire
indicating panel will emit a sound and light alarm, meanwhile the relevant fire
alarm information will be displayed on the screen.
. Features
Ⅱ
•
Beautiful and elegant appearance
•
Easy to operate, easy to install
•
With a stable and reliable communication
of RS485 bus , and the maximum length of
the bus is over 1,000 meters
. Technical Parameters
Ⅲ
•
Voltage
：
DC 24V±20%
•
Current
：
monitor state
≤
32mA
，
alarm state
≤
66mA
•
Standard
：
GB 17429-2011
《
Fire Indicating Panel
》
•
Capacity
：
single fire indicating panel can display up to 99 pieces of
information
•
Wiring system: five-wire system, power cord (+24V, GND), 485 bus (A,
B), PE line( ).
•
Operating environment
：
indoor
；
temperature
：
-10
℃
～
+50
℃
(14 ~ 122 )
℉
℉
；
relative humidity
：
≤
95% RH (40
℃
，
non-condensing)
；
•
Dimensions
：
210.0mm×150.0mm×33.5mm
•
Weight
：
0.5KG
. Appearance
Ⅳ
and Dimensions
The Figure 1 below illustrates overall dimensions of the panel.
