GUIDE TO INSTALLATION AND OPERATION
RCP-200 |
31
Touch numbers in the keypad to enter the numeric portion of the [device / source / destination] description.
•
Only numbers that correspond to available options will be enabled in the keypad, one digit at a time. For instance,
in the figure, the first digit of the number of the HDA- device can only be 1. Once you have entered it, the possible
values for the second digit will be enabled, etc.
•
If there is only a single device available with the selected prefix, it will appear without the need to use the numeric
keypad
Use the back arrow in the bottom left corner of the keypad to backspace to correct input errors.
Once the complete identity of the [device / source / destination] has been entered:
•
All numbers in the keypad will be disabled
•
The action key or soft key appropriate to the task at hand will be enabled; e.g.
Select
,
Take
,
Arm Pst, , Clear Bus.
5.3.5 Using the Alpha-Numeric Sorter GUI:
The Alpha-Numeric Sorter GUI may be used to perform four tasks:
•
Select a device to control in iControl services
•
Select a source while controlling a router
•
Select a destination while controlling a router
•
Activate a router crosspoint
The following description applies to all of these in general. Where specific differences arise for one of these tasks, it will
be pointed out in the text.
Here is a sample screen in the Router Control mode:
