GUIDE TO INSTALLATION AND OPERATION
32
| RCP-200
Here is a sample screen in the Device Selection mode:
As you begin, each of the alpha-numeric keys will either be gray or colored.
•
All colored keys are active, and each will display one or more characters.
•
Some keys will display a yellow number following the characters; other keys may have no number.
If there is no yellow number, then the complete description of the [device/source/destination] is shown on the key
•
Touch the key - the complete name will appear in the Pst line in the upper right, all alpha-numeric keys will go
gray, and the Clear, Back-Arrow and action keys or soft keys will be enabled.
If there is a yellow number, the key does not show a complete device description, and additional key touches will be
required.
•
The yellow number shows how many keys will be active in the next level, once the top-level key is touched.
•
The characters on the key show the portion of the device name that will be common to all of those second-level
keys
•
Touch the key to move to the second level – the characters that appear in the first-level key will appear in the Pst
line in the upper right, and all keys corresponding to the next character in the device description will become
active, showing the original characters grayed, plus additional characters.
For example, refer to the figure above.
If you touch
A
, then the display will change to show six active keys, where the character following
A
in the device
description is key; e.g.,
A
CP-1721
will appear in the C key,
A
DX-3981
will appear in the D key,
A
MX-1881
will appear
in the M key, etc.. If the system includes both AMX-1881 and AMX-3981, then the display will show
A
MX-
2
with the
(yellow) 2 indicating that in the next level there will be 2 keys active, one for each of the two AMX types.
Once you are into the second level and beyond, the back-arrow and clear keys at the bottom of the display become
active.
•
Back–arrow moves you back up to the previous level
•
Clear moves you all the way back to the top level.
Once the complete identity of an available device has been entered:
•
All numbers in the keypad will be disabled
•
The action key or soft key appropriate to the task at hand will be enabled; e.g.
Select, Take, Arm Preset, Clear
Bus.
