8
1.3
Charging the Battery
You must fully charge the battery before starting to use your Smartphone for the first time.
1.
Attach the converter to the AC adapter.
2.
Connect to AC power. You can connect with the USB cradle or without it.
With the USB Cradle
Slide your Smartphone into the cradle.
Connect the appropriate end of the
AC adapter to the USB cradle.
Plug the other end of the AC adapter
into a wall outlet.
Without the USB Cradle
Connect the USB adapter to the bottom of
your Smartphone.
Connect the appropriate end of the AC
adapter to the USB adapter.
Plug the other end of the AC adapter
into a wall outlet.
3.
The status indicator on the Smartphone glows orange to indicate that battery charging is in
progress. The indicator is off when the battery is fully charged.
_
N O T E
`
When charging the battery for the very first time, you should charge it for at least eight hours.
A discharged battery can be fully charged after two hours. The charging time may vary under
different conditions.
When a fully discharged battery is being charged, you can turn on the Smartphone only after it
connects to the AC power for at least five minutes.
You can remove the battery and put it in the cradle’s battery compartment for charging.
You may use your Smartphone during charging. When the Smartphone is on, you can check the
charging level by selecting
Start
Settings
Power Management
.
Converter
Converter
Summary of Contents for Digi Walker 8870
