Minolta MAGICOLOR 2350 User Manual Download Page 171

Page: 171 / 208

Repacking the Printer

169

Remove the brackets (two at the front and one at the back) used to attach
the lower feeder unit to the printer.

Slide the tray back into the printer.

With the help of another person, lift
the printer by its carrying grips, and
place it on a flat surface.

WARNING!

Your printer weighs appro

ximately 62 lbs

(28 kg). Be sure to have help when lifting
and m

oving it.

Repack the lower feeder unit in its original shipping carton for storage or
shipment.

If you’re returning the printer for service, you don’t need to return
the lower feeder unit unless instructed to do so.

EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500

Summary of Contents for MAGICOLOR 2350

















































































































































































































Search results

Summary of Contents for MAGICOLOR 2350

Reviews:

Related manuals for MAGICOLOR 2350

Brands by name

Popular brands

Minolta MAGICOLOR 2350, User Manual

Search results

Summary of Contents for MAGICOLOR 2350

Reviews:

Related manuals for MAGICOLOR 2350

Brands by name

Popular brands