Minolta MAGICOLOR 2350 User Manual Download Page 112

Page: 112 / 208

Cleaning the Printer

110

Remove the waste toner bottle.

The waste toner bottle
contains waste toner. Be
careful not to tilt the bottle
while removing it.

Holding the waste toner bottle
vertically, plug the two openings with
the caps.

Place the removed waste toner bottle, with the openings facing up,
on a stable surface (not the printer).

Pull out the laser lens cover.

The laser lens cover cannot
be removed. Do not pull it with
too much force.

Wipe the surface of the laser lens
cover with a soft, dry cloth.

Reinsert the laser lens cover.

EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500

Summary of Contents for MAGICOLOR 2350

















































































































































































































Search results

Summary of Contents for MAGICOLOR 2350

Reviews:

Related manuals for MAGICOLOR 2350

Brands by name

Popular brands

Minolta MAGICOLOR 2350, User Manual

Search results

Summary of Contents for MAGICOLOR 2350

Reviews:

Related manuals for MAGICOLOR 2350

Brands by name

Popular brands