Minolta MAGICOLOR 2350, User Manual

Page: 131 / 208

Solving Other Problems
129
The control
panel
displays
X
LOW/
REPLACE?
much sooner
than
expected.
A high-capacity toner
cartridge was
installed, but the toner
size was set at
standard capacity. In the Quality/Toner menu, choose
Change Size and then select the
capacity listed on the cartridge label.
The toner cartridge is
defective. Remove the toner cartridge and check
for damage. If it is damaged, replace it
(Quality/Toner/Replace).
You can’t
print a
configuration
page. The printer is not
ready when
Configuration was
selected from the
Print menu. Make sure that the printer is ready
before trying to print the configuration
page.
The tray does not
have media. Check that the media trays are loaded
with media, in place and secure.
The printer’s doors
aren’t closed
securely. Make sure the doors are closed
securely. Close all doors gently to avoid
jarring the printer. Make sure the waste
toner bottle in installed correctly.
There is a media jam. Check for a media jam.
Data was
sent to the
printer, but it
doesn’t print. An error message is
displayed in the
message window. Handle according to the message
displayed.
Printing
takes too
much time. The printer is set to a
slow printing mode
(for example, for
OHP, thick stock, or
some other special
kind of media). It takes more time to print with special
media. When using regular paper,
make sure that the media type is set
properly in the driver and the control
panel.
The printer is set to
power saving mode. It takes a little time for printing to start in
power saving mode.
The job is very
complex. Wait. No action needed.
The printer memory is
insufficient. Add more memory.
Symptom Cause Solution
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500