Minolta MAGICOLOR 2350, User Manual

Page: 130 / 208

Solving Other Problems 128
Solving Other Problems
Media is
jamming. Multiple sheets of
transparency (OHP)
media are collecting
static electricity in the
tray. Remove the transparencies and load
them in the tray one sheet at a time.
Do not fan large quantities of
transparencies before loading them.
The media is moist
from humidity. Remove the moist media and replace it
with new, dry media.
Unsupported media
(wrong size,
thickness, type, etc.)
is being used. Use media that is covered by the
printer warranty.
Media supply roller is
dirty. Clean the media supply roller.
For more details, refer to “Media
Rollers” on page 105.
Symptom Cause Solution
Printer power
is not on. The power cord is not
correctly plugged into
the outlet. Turn the power switch off (O position),
then remove the power cord from the
outlet and plug it back in.
Something is wrong
with the outlet you are
using for the printer. Plug another electrical appliance into
the outlet and see whether it operates
properly.
The power switch is
not correctly turned
on (I position). Set the power switch to the off (O)
position, then set it back to the on (I)
position.
The printer is
connected to an outlet
with a voltage or
frequency that does
not match the printer
specifications. Use a power source with the
specifications listed in appendix A,
“Technical Specifications.”
Symptom Cause Solution
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500