Minolta MAGICOLOR 2350, User Manual

Page: 145 / 208

Status, Error, and Service Messages
143
OPC DRUM LOW
The OPC drum will
need to be replaced
soon. Make sure you have a
new OPC drum on hand.
OPC DRUM MISSING
The OPC drum is not
installed. Install the OPC drum.
OPC OUT
The OPC drum needs
to be replaced. Replace OPC drum and
waste toner bottle.
PAPER JAM
DUPLEX
Media has jammed in
the optional duplex
unit. Locate and remove the
jam.
PAPER JAM
EXIT
Media has jammed
between the print
engine and the output
tray. Locate and remove the
jam.
PAPER JAM
FUSER
Media has jammed in
the fuser unit. Locate and remove the
jam.
PAPER JAM
TRANSFER
Media has jammed in
the transfer area. Locate and remove the
jam.
PAPER JAM
TRAY 1
Media has jammed
while being pulled
from the multipurpose
tray. Locate and remove the
jam.
PAPER JAM
TRAY 2
Media has jammed
while being pulled
from the optional
lower feeder unit. Locate and remove the
jam.
PAPER MISMATCH
The paper size set
with the printer driver
is different from the
size of paper loaded. Check paper size
settings; load correct
size.
PUT X
IN TRAY Y
The media tray “Y”
(specified tray) is out
of media. Load media
size and type “X.” Load more media.
REPLACE OPC
The OPC drum needs
to be replaced. Replace OPC drum and
waste toner bottle.
REPLACE OPC DRUM
The OPC drum needs
to be replaced. Replace OPC drum and
waste toner bottle.
This message... means... do this...
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500