Minolta MAGICOLOR 2350 User Manual Download Page 111

Page: 111 / 208

Cleaning the Printer

109

With the right door still open, place
the printer on the lower feeder unit.

Install the brackets (two at the front and one at the back), and then close
the right door.

Reinstall the waste toner bottle if you removed it and close the front
door if you opened it.

Slide the tray back in.

Plug in the printer; reconnect the interface cable and turn the printer on.

In compliance with UL guidelines, “The appliance inlet is considered to
be the main disconnect device.”

Printer Interior and Laser Lens Cover

Open the front door.

EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500

Summary of Contents for MAGICOLOR 2350

















































































































































































































Search results

Summary of Contents for MAGICOLOR 2350

Reviews:

Related manuals for MAGICOLOR 2350

Brands by name

Popular brands

Minolta MAGICOLOR 2350, User Manual

Search results

Summary of Contents for MAGICOLOR 2350

Reviews:

Related manuals for MAGICOLOR 2350

Brands by name

Popular brands