Minolta MAGICOLOR 2350, User Manual

Page: 60 / 208

Printer Menu Overview 58
System Default/Energy Saver Submenu
The Energy Saver submenu allows you to set the time lapse between the end
of a print job and the time the printer returns to Energy Saver status. Energy
Saver mode saves energy because the printer’s heating unit turns off. The
printer may take up to 215 seconds to warm up before it is ready to print
again.
Energy Saver options for 2 and 3 hours are available only on 110V
printers.
System Default/Autocontinue Submenu
The Autocontinue submenu allows you to continue printing if the media tray
has a different size or media type than what the print job requests.
System Default/Security Submenu
The Security submenu enables the security function which requires users to
enter the password to access or change printer information and configuration.
SYSTEM DEFAULT
ENERGY SAVER
1 MINUTE 15 MINUTES 30 MINUTES 1 HOUR 2 HOURS 3 HOURS
SYSTEM DEFAULT
AUTOCONTINUE
ON OFF
SYSTEM DEFAULT
SECURITY
CONFIG INSTALL
ENABLE SET
PASS-
WORD
ENABLE SET
PASS-
WORD
ON OFF ON OFF
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500