Minolta MAGICOLOR 2350, User Manual

Page: 127 / 208

Solving Problems with Media Jams
125
Solving Problems with Media Jams
Frequent jams in any area indicate that area should be checked,
repaired, or cleaned. Repeated jams may also happen if you’re using
unsupported print media.
Symptom Cause Solution
Several
sheets go
through the
printer
together. The front edges of
the media are not
even. Remove the media and even up the
front edges, then reload it.
The media is moist
from humidity. Remove the moist media and replace it
with new, dry media.
Too much static
electricity is present. If you are using paper, fan it before
putting it in the printer.
If you are using transparancies, do
not fan them before putting them in
the printer.
Media jam
message
stays on. Right-side door
needs to be opened
and closed again to
reset the printer. Open and close the right-side door of
the printer again.
Some media remains
jammed in the printer. Recheck the media path and make
sure you have removed all of the
media jams.
EDNord - Istedgade 37A - 9000 Aalborg - Telefon 9633 3500