Mindray BeneFusion VP3 Vet Operator'S Manual Download Page 42

Page: 42 / 92

5-4

5.4 Sequential Mode

Several different sequences (parameter group) can be set in Sequential Mode, and

the infusion pump infuses according to the set infusion sequence.

5 sequences can be set in this mode. The rate of the current sequence can be

changed during the operation process. In Sequential Mode, the VTBI, Rate, and

Time are settable and the ranges of the set values are taken to be the same with

Rate Mode.



: A sign denotes the total VTBI and the total time of all sequences.

NOTE



If only set [Rate] or [VTBI] for a sequence, the sequence is invalid.



If there is invalid sequence between sequences, the infusion can not be

started.

Summary of Contents for BeneFusion VP3 Vet




























































































Search results

Summary of Contents for BeneFusion VP3 Vet

Reviews:

Related manuals for BeneFusion VP3 Vet

Brands by name

Popular brands

Mindray BeneFusion VP3 Vet, Operator'S Manual

Search results

Summary of Contents for BeneFusion VP3 Vet

Reviews:

Related manuals for BeneFusion VP3 Vet

Brands by name

Popular brands