Mindray BeneFusion VP3 Vet, Operator'S Manual

Page: 36 / 92

4-6
NOTE

Purge rate can not be changed.

[Air in line] and [Accumulate air] alarms will not be triggered during
purge.
4.2.9 Set Infusion Parameters
Under each infusion mode, users can set infusion parameters by pressing ,
, , , and .
4.2.10 Infusion
When ready, connect the infusion set to the animal. Press to start the
infusion, and the screen will display the running icon. An arrow moves from right
to left. The speed of the arrow increases as the rate is increased,.
WARNING

Users should inspect and confirm whether the parameter settings are
correct before infusion.

If there is a liquid drug or residue on the ultrasonic sensor or the nearby
tube surface, the user should completely clean the area before infusion.

Users should regularly monitor the connection between the infusion set,
pump and animal, and infuse according to the method mentioned in the
manual.
NOTE

When in running status, if there is no operation in other interface over 2
minutes, it will return to the running screen automatically.