MIMAKI UJV500-160, Operation Manual

Page: 24 / 228

1-10
Connecting Cables
Connecting USB2.0 Interface Cable
Connect the PC and this machine with the USB2.0
interface cable.
Notes on USB 2.0 Interface
 When two or more UJV500 machines are connected to one personal computer
When two or more UJV500 machines are connected to one personal computer, the personal computer may not
recognize all the UJV500 machines normally.
Reconnect the unrecognized UJV500 machine to another USB port, if available, and check to see if it is
recognized.If the UJV500 machine is not recognized by the newly connected USB port, use USB 2.0 repeater
cables available on the market.
 Notes on peripheral devices in USB high speed mode
When a peripheral device (USB memory or USB HDD) to be operated in USB high speed mode is connected to
the same personal computer that a UJV500 machine is connected to, the USB device may not be recognized.
When UJV500 is connected to the personal computer to which an external HDD is connected via USB, the
speed of data output to UJV500 may drop.That can cause the head unit to stop temporarily at the right or left
end during printing.
• Your RIP must be compatible with USB
2.0.
• Contact a RIP maker near your location or
our office when the USB2.0 interface is not
attached to the PC.
• Your RIP must be compatible with USB 2.0.
USB cable
USB 2.0 repeater cable