manualshive.com logo in svg

MIMAKI UJV500-160, Operation Manual

Share
Download
MIMAKI UJV500-160 Operation Manual Download Page 37

2-3

1

2

Basic Operation

s

4

5

6

Turning the Power ON/OFF

Turning the Power ON

1

Turn the main power switch ON.

• Set the main power switches located on the side of this

machine to the “I” side.

2

Push the power button.

• Push the power button located on the operation panel.

• The firmware version is displayed when the power is turned ON.

• The machine performs its initial operation.

3

The machine enters LOCAL.

4

Turn ON the power of the connected PC.

• Turn the power ON after the front cover and maintenance cover are closed. 

• Always make the main power switch ON. If you leave it OFF, it may cause nozzle clogging of the 

head. In some cases, recovery may become difficult.

Main power 

switch

Power button

U J V 5 0 0

S t a r t - u p

V e r 1 . 0 0

< LOCA L >

Summary of Contents for UJV500-160





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands