manualshive.com logo in svg

MIMAKI UJV500-160, Operation Manual

Share
Download
MIMAKI UJV500-160 Operation Manual Download Page 17

About installing this machine

1-3

1

Be
fore Use

3

4

5

6

About fixing machine

The leg of this machine has the level foot to fix the machine.
Before turning the power ON, make sure that the printer body is fixed with the leveling feet. The printer body
may start moving during operation if it is not fixed with the leveling feet.

Moving This Machine

• Put the supplied iron base plate (gray) between each leveling foot and the floor. To hold the weight of 

the printer, using plate is recommended.

• When the machine is moved to any place other than on the same step-free floor, contact your 

distributor or our service office.
If you move it by yourself, failure or damage may occur.
Be sure to request your distributor or our service office to move this machine.

Summary of Contents for UJV500-160





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands